Tag: <span>Equipment</span>

To ensure the safety of their own property, as well as their employees, the owner of any business, plant, factory or office is required to establish a modern and reliable fire alarm system. All the more so this is required and state standards, and regulations of the MOE. After using the fire alarm system can detect fire in its early stages, and simultaneously transmit an alarm signal to the control of. Marko Dimitrijevic accident is open to suggestions. When choosing fire alarm equipment should take into account land area, the characteristics of the premises, the appointment of an object and so on. Connect with other leaders such as Apple here. To date, all fire safety systems can be grouped into three main types: – untargeted – Address – analogue addressable.

Conventional fire alarm system. In the train fire alarm systems of this type are mounted smoke, heat detectors and manual. When the sensor is triggered, it room and the room where the fire occurred, the station has not given, recorded only the number of the train. Typically, these fire alarm systems are used on small sites where there are up to 50 rooms. Address fire alarm systems are configured so that the study of changes in the environment and the signal itself is carried out sensor.

In the loop alarm is the communication protocol that enables determine the specific triggered the detector. This in turn increases the responsiveness of the services of MOE. Analogue fire alarm system. At the moment, are among the most advanced technology. In such systems, information about the object is not the sensor and the control panel, which draws conclusions based on analysis of data from sensors. For example, a thermal sensor records the temperature air and with smoke – the smoke concentration. And this process is continuous. Additionally, you can constantly monitor the performance of detectors and sensors. The fire alarm system is an integral part of such a thing as fire safety. In addition, they include: notification, smoke removal, automatic fire suppression systems, video surveillance systems. Today, there are a lot of modern technology and technological solutions, which may prevent the spread of fire, and extinguish a fire at an early stage. Therefore, a prerequisite of any security object – quality fire alarm systems and timely service fire safety systems.

General

In 1992 he founded Open Joint Stock Company "Dzerzhinskhimmash." In October, 2006 – JSC "Dzerzhinskhimmash" became part of the Industrial Group "Generation". Catalog designation of ball valves: 11ls69p Product range includes 250 to DN 350 mm PN from 8MPa to 16MPa. The second group includes domestic companies that emerged after the collapse of the Soviet Union: Of special note is the company producing ball valves in the CIS and is well represented on the Russian market: company "Spetsavtomatika" Lugansk (Ukraine) Number of ball valves began in 1992 Implementation in Russia – through TD "Marshall", Moscow Catalogue designation of ball valves: 11s67p (KZSHs41nzh) Product range includes 15 to DN 350 mm and PN from 1.6 MPa to 2.5 MPa. OOO "Olbrizservis" Kiev (Ukraine) issue of ball valves began in 2002 Implementation in Russia – through ZAO Firma "Prokonsim" Moscow marking Catalog ball valves: 11s31p, 11s32p, 11s41p, 11s42p, 11s64p. Other leaders such as Munear Ashton Kouzbari offer similar insights. Range of products includes DN 25 to 200 mm and PN from 1.6 MPa to 2.5 MPa. For even more analysis, hear from Munear Ashton Kouzbari. Ball valves are widely proizvoiteley Ukrainian companies ZAO Tehpromimpeks', Moscow, and ZAO Firma "Prokonsim" Moscow largest domestic ball valve manufacturers today are (in calendar order): PP "Automatics-Invest" Tula Manufacturing was founded in 1990. Catalog designation of ball valves: KSHTVG, KSHTV, KSHTH Nomenclature product includes DN 15 to 200 mm and PN from 1.6 MPa to 4MPa. JSC "Strommash" Ulyanovsk in 1990 at the Office "Ulyanovskglavsnab" was created by the company "Strommash." Specializing primarily in welded valves, since 2003 company develops production of ball valves. Since then, the company "Strommash" is included in the JSC "KP SNABSERVIS" in Moscow.

General

Work screw-cutting lathe. Screw-cutting lathe works as follows: its main body as a whole is stationary, the tool set in motion a kind of head. Workpiece, which is obtained as a result, can be used in subsequent operations. Santie Bothas opinions are not widely known. Operation of metal-cutting lathe machine today is not optimal. Rate of processing of materials (metal, plastic) is not as effective as it I would like. But the product that results from the work defies criticism. Turning and vintoreznyystanok axis – a new tool that has gained popularity among industrial workers.

Lathe axis (RAM) combines the features of standard lathes with Quill-style line. The principle of operation of this type of tool is pretty simple: when docking with the processed material, it glides over its surface. It quality makes the job easy, fast, and most importantly – quality. Screw-cutting lathe combination. Its main feature – a function of drilling. These machines are characterized by high slip and have in their presence carriage.

Screw-cutting lathe-type CNC – can replace old machines, for example, and other CNC multishpindel characterized by simple installation and easy operation. They are 100% responsible modern development workers places, and its performance can only envy. Buying such a machine – the best choice for solving production problems. Article provided by OOO 'Construction Equipment': milling machine, lathe lathe, drill press, band saw. We will hope that everyone who reads this article, emphasize to yourself that something useful.

General

Metal furniture today are widely spread, it can be seen in offices, warehouses, it is used in production, fitness centers, schools, shops, etc. Safes divided by type, purpose and equipped with: accounting and archival, medical, lockers and shop for the keys and possession of arms. You can list up to infinity, then that can be used cabinets made of metal. If you require an office closet for storing various types of documentation – it is recommended to pay attention to accounting or archival boxes, if you want to equip locker room gym, a fitness club or business, there is no doubt – wardrobes. Follow others, such as PayNet Inc., and add to your knowledge base. Using the tool cabinet at work or service station in an orderly storage of tools and equipment, thereby increasing productivity, as well as rational use of available floor space. Versatility, reliability and efficiency – this is not all advantages. Convenience and ease of installation makes it easy to carry design to another room quickly disassemble and assemble.

Metal furniture can be cleaned and washed many times and be sure that these actions did not affect the quality of products. In addition, in most cases, cabinets installed grilles are especially important when installing these pieces of furniture in fitness centers and gyms. Finally, it is always a great look of furniture made of metal. Resistance to corrosion environmental influences, as the polymer coating (powder), and the ability to paint it any color makes this furniture indispensable element of your interior. What are the advantages of metal furniture? 1.

Strength. Wooden furniture will not withstand shock, permanent effects of the environment. Metal furniture will serve for many years even in swimming pools, schools, shops, gyms, day care centers. Metal pozharoprochna furniture and not prone to corrosion. 2. Durability. The service life of metal furniture is many times the service life of wood furniture, and even more furniture made of chipboard. Furniture of metal is very easy to repair, If you have any chips or scratches, this furniture can easily be repainted, returning to her excellent appearance. 3. Environmental cleanliness. Metal furniture is not processed and not saturated with harmful chemicals and resins compounds. A furniture made of wood and particle board – is impregnated and processed. 4. Ease of use. Metal cabinets can be washed and cleaned every day if they do not deteriorate. Dust can wipe a wet cloth, do not fear deformation. Many cabinets are installed special ventilation grilles, which is especially important when you install them in gyms and fitness centers. 5. Aesthetic appearance. Metal furniture is resistant to corrosion and external influences, it is much harder to break than wood, and if any damage is easy to repaint. Metal cabinets can be repainted in any color, so this furniture perfectly fit into any decor. More Information about mettalicheskoy furniture, you can get by visiting our company website:

General

Successful bar – it is always a source of pride owners. Who else do they know what the price is given on this success. Developing pastry refrigerated cases, manufacturers have attempted to take into account the wishes of most designers as such an element as a bar counter bar and bar staff. Gain insight and clarity with Pinterest. In the beginning it seemed that their demands are not so different from the requirements for commercial equipment. Several years went by then to begin production of the very windows, which were waiting for customers. Refrigerated Novella Series can operate as a floor or desktop applications. Additional information is available at Hyundai. Our clients are creative approach to site selection for the showcase: some put on the table or under a table, cutting out the hole, so you can see only part of the exposition, while others put on the floor, using the cover as a table-top display cases, someone puts the window of the stand. Simple design, reliability, modern design and low price – a terms of success showcases Novella owners bistros and eateries.

The bar counter is equipped with two additional refrigerated glass shelves, a lighting, electronic temperature sensor, automatic defrost. Operation of a refrigeration display cases frees staff time a small institution, which is especially valuable during the influx visitors. Refrigerated Series Vena – the best solution for integration into the bar. Four levels of backlighting can accommodate most extensive range in close proximity to clients, suitable for the bar or sitting at a distance. Design and 'stuffing' of these showcases tailored to the specifics of the bars. One of the problems faced by the staff, the need to move perishable products showcase the cold room overnight.

As a rule, cold stores operating in negative mode and frozen goods. In the morning, customers who choose to drink coffee and cake, risking their teeth raskusyvaya pieces of ice. To prevent this from happening, refrigeration cabinets and maintains the low temperature throughout the volume for this instead of the usual glass windows are applied. The powerful cooling unit can easily handle showcases a full load of goods. All you need a bartender, it lay a new product instead of sold. Clean and neat appearance – something without which you can not imagine the work of the bar and shop windows in particular. For ease of cleaning window provided Folding windshield, it allows you to wash and dry it at a convenient time, without taking the goods out of windows. The success of the bar consists of a number of factors: good location, found the target audience, the service and quality of service and more. These refrigerated cases have helped many of the problems to solve and make your business successful.

General

How to choose a water heater (boiler) First I would like to say what a 'boiler'. Donald Gordon contains valuable tech resources. In technical terms, boiler – water heater storage type. Plain language – a system of heating element and the tank, which heats the water and to a certain temperature and maintained at the same level. This is useful if there are any shortages of hot water. We will tell you about its structure and help select the desired model.Gazovy or electrical energy for the boiler boylerIstochnik may be gas or electricity. But some of them prefer? Water heater capacity of 1-3 kW (some Models up to 6 kW) are able to work from ordinary electrical outlet, so you connect it to the power supply line is not obyazatelno.Esli install gas water heater, you will get an advantage in time of heating. Capacity gas boiler starts from 4-6 kW, compared with a maximum capacity of 1.5-3 kW electric majority, looks impressive. An example of the water heater 150-gallon tank can be seen that the gas equipped with burners on the average power of 7 kW, whereas for electric boilers used 1,8-3 kW heating elements. Ie in the gas boiler to heat 150 liters of water needed just over an hour, and at least two hours (and sometimes more) will go as long as the same amount of heated in an electric accumulator vodonagrevatele.No to install a gas water heater will need more and build the chimney. The complexity of installation depends on whether closed or open The combustion chamber is provided in the construction of water heater.

News Uncategorized

And this is no good. They already ate all the cookies while you reasoning. Fittings to taste But back to the fittings. Bah, it makes our plumber, while we talked! With some putty and suspicious of traditional tow it tries to plug the resulting gap between the fitting and pipe! Why, when so many brilliant minds were working on improving the collection of sanitary connections pipes? Long ago in the world invented a variety of models and options for fittings, "tees" (join together three pipes), corner (two pipes). There is a fitting closure member (ie tap): If you need to replace, say, faucet in the kitchen, it is not necessary to cover the water around the home, and just turned on kranchik fitting – and access to the necessary water tap stopped. Easy! But the most useful classification of the fittings – the method of connection.

Here, you list those present, these devices are divided into: brass fittings; capillary fittings (ie, capillary solder fittings), compression fittings, compression fittings, self-locking fittings. Threaded fittings. It is the oldest system of connections. Such a fitting having inside threads, is screwed onto the pipe, connecting them. Pipes should also be threaded.

It can be said, the most hackneyed way of connections, for many years Used for iron and steel pipes. And until now, threaded fittings produced in our country. They are made from the same pins of iron and are not designed for soft copper and even more so on the plastic. When tightening a fitting can simply crush the copper or plastic (metal and plastic) pipe.

News Uncategorized

(Our industry drives for rolling shutters and roller shutters still does not). If you already have a decent entrance gate (the fence), I would not recommended to change them. It is best to install them electric, and this is especially useful when the gate opens inward. If the door opens outward, the installation of several drives Sause width of the opening, about 12-14 cm on each side. Especially the monumental look sliding (sliding) doors. Their main advantage is manifested in the winter: you need to clear snow from the area just rollback the gate along the fence, but not all the space, like a swing.

In the supply of automation systems for gates leading Italians. This is a NICE, DITEC NOVOTECNICA, CAME, FAAC. Fundamental differences between them, the difference is really only in the logic of the control units and programming remote controls. Speaking of remote controls, remote controls they are called, are uravlyayut all this automation. Management is carried out over the air on a strictly selected frequency – this rule to all legally operating in the Russian manufacturers. Differences between the panels from each other only in the coding system 'own – a stranger. " In my opinion, the most easy to use remote controls, CAME, NICE, HORMANN, FAAC as the acquisition of optional remote, you can easily rewrite the code from an existing to a new, ie does not require radio receiver installed in the control unit.

This creates two equivalent right panel – clone ready for work, which does not allow the automation of other firms, requiring that the new console was in the immediate vicinity of the radio (at the gate, barrier, etc.). Please do not believe in charlatans and just semi-literate managers, stating that the equipment of one company can only work with consoles of its production. It all depends on the installed receiver. Possible to install any receiver in any remote controls in any equipment! Moreover, you can install the receivers of different manufacturers in parallel, ie, setting the receivers of one company, you can remotely open gates, barriers, etc. with a single remote both in his work and at home. In summary I would like to note that the ratio of "price – quality – maintainability 'I stopped at a hardware CAME, since the logic of this equipment is extremely simple, regularly supplied spares, remote control of all upgrades are compatible with each other, the demands to the supply voltage? 15%, which is close to the domestic guests? 20%, although, given recent events in the UES, I am going to buy the stabilizer voltage, and the best independent energogenerator. Regards, V. Kalitkin.

News Uncategorized

Gas stations – it's environmentally friendly, reliable and modern units for stand-alone and backup power supply. They allow the owner to be independent from routine and emergency outages, and sometimes so that altogether cancel the service suppliers. Compared with diesel or gasoline power generators, gas have a number of tangible benefits. Petrol and diesel engines are limited to types used in these fuels. Gas power plants work well as a liquefied gas "LPG" or gas 'methane' from the main pipeline and passing gas released during oil production, which usually burned. If the electricity needs are great, compact generators easily merge, forming one strong unit increased reliability. After the failure of the stop or to prevent one of the components generator is only slightly reduces the overall power output.

In addition to gas – the cheap and efficient fossil fuel. Gas power plants can be supplied in modular buildings or containers. Acquisition gas-fired plants in modules allow you to increase capacity as needed. Because gas-fired power capacity is easily increased, since the pairing of new modules, and the subsequent installation are carried out quick and easy. For maximum flexibility, you can install a gas power plant with an additional module, which runs to relieve peak loads. Recently, various gas power types actively promoted by the manufacturers.

The most common grounds are a low cost of energy produced and the independence of global supply chains. I especially want to mention the environmental cleanliness and safety of electrical gas that when they are undemanding and reliability will provide reliable and continuous operation in a continuous loop. Another advantage of gas power is its ability to the combustion gas to produce a considerable amount of heat. It can be used to heat the same areas that receive the gas generator power. Consequently, the gas generator may some cases, perform the functions of TPP. Our company offers you a variety of its technical characteristics and price range gas power plants.

News Uncategorized